English
Français
Deutsch
Português
Español
русский 
한국어
العربية
Italiano
Indonesia
Schweiz
Polski
Nederlands
ישראל - עברית
Perzisch
ไทย
日本語
ኢትዮ-አማርኛ
Việt Nam
Kiswahili
Srpski
Ελληνικά
繁體中文Product
Back
- ebmpapst
- ZIEHL-ABEGG
- Rosenberg
- DELTA
- Nicotra Gebhardt
- S&P
- Wistro
- SANYO
- FULLTECH
- SANMU
- SUNON
-
HVAC Controls & Components
-
Sanhua
4 Way Reversing Vavle Electronic Expansion Valve Driver Electronic Expansion Valve Electronic Shut-off Valve Ball Valve Electronic Expansion Valve Controller Refrigerated Cabinet Controller Pressure Transducer Solenoid Valve Thermostatic Expansion Valve Pressure Control Check Valve Sight Glass Pressure Regulator Liquid Injector Brass Service Valve Charge Valve Filter Drier Drain Pump Accumulator Liquid Receiver Oil Separator
-
Fengshen
Pressure Control Differential Pressure Control Temperature Control Flow Switch Pressure Controlled Water Valve Evaporation Pressure Regulating Valve Temperature Controlled Water Valve Solenoid Valve Thermostatic Expansion Valve Temperature Responsive Expansion Valve Constant Pressure Expansion Valve (Hot Gas Bypass) Pilot and Main Valve Forerunner Pressure Regulating Valve Sight Glass
- Magic
-
Sanhua
- Accessories
PYF Series Liquid Injector
Brand：
Sanhua
Category：
Liquid Injector
Description：
Liquid injector(temperature response expansion valve) is mainly used in medium and low temperature refrigeration system. When the compressor exhaust temperature is higher than the valve set temperature, the temperature bulb senses the exhaust temperature and then the valve
opens. The liquid refrigerant at the condenser outlet is injected into the compressor suction line or middle chamber after throttling and cooling, thus reducing the exhaust temperature and preventing the compressor lubricating oil from carbonization. To avoid deterioration caused by mechanical wear which will shorten the service life of the compressor.
opens. The liquid refrigerant at the condenser outlet is injected into the compressor suction line or middle chamber after throttling and cooling, thus reducing the exhaust temperature and preventing the compressor lubricating oil from carbonization. To avoid deterioration caused by mechanical wear which will shorten the service life of the compressor.
Description
