English
Français
Deutsch
Português
Español
русский 
한국어
العربية
Italiano
Indonesia
Schweiz
Polski
Nederlands
ישראל - עברית
Perzisch
ไทย
日本語
ኢትዮ-አማርኛ
Việt Nam
Kiswahili
Srpski
Ελληνικά
繁體中文Product
- ebmpapst
- ZIEHL-ABEGG
- DELTA
- SUNON
- Rosenberg
- SODECA
- FULLTECH
- Nicotra Gebhardt
- S&P
- Wistro
- San Ace
- SANMU
- ADDA
- NMB-MAT
- WEIGUANG
-
HVAC Controls & Components
-
Sanhua
4 Way Reversing Vavle Electronic Expansion Valve Driver Electronic Expansion Valve Electronic Shut-off Valve Ball Valve Electronic Expansion Valve Controller Refrigerated Cabinet Controller Pressure Transducer Solenoid Valve Thermostatic Expansion Valve Pressure Control Check Valve Sight Glass Pressure Regulator Liquid Injector Brass Service Valve Charge Valve Filter Drier Drain Pump Accumulator Liquid Receiver Oil Separator
-
Fengshen
Pressure Control Differential Pressure Control Temperature Control Flow Switch Pressure Controlled Water Valve Evaporation Pressure Regulating Valve Temperature Controlled Water Valve Solenoid Valve Thermostatic Expansion Valve Temperature Responsive Expansion Valve Constant Pressure Expansion Valve (Hot Gas Bypass) Pilot and Main Valve Forerunner Pressure Regulating Valve Sight Glass
- Magic
- Sonyo
- CAREL
- Tecumseh
- Danfoss
- Emerson
-
Sanhua
- HVAC Terminal Units
- Multifan
- Accessories
FN050-4EK.4I.V7P1
The exact operating point should be confirmed against the applicable fan curve and equipment requirements.
Nominal data
Description
FN050-4EK.4I.V7P1 ziehl-abegg Specification drawing：
Axial Fan Design
Axial fans move air in the direction of the fan shaft and are commonly selected for applications requiring substantial airflow through relatively open heat exchangers or ventilation paths. Actual performance changes as system resistance increases.
HVAC and Heat-Exchanger Applications
This model can be considered for compatible condenser, air-conditioning, heat-exchanger and general ventilation equipment. Final suitability depends on required airflow, pressure, temperature, mounting and electrical conditions.
Replacement Information
For replacement, confirm the complete model number and article number 140057. Check voltage, frequency, fan diameter, mounting dimensions, airflow direction, rotational direction and electrical connection. Similar FN050 models should not be treated as identical without datasheet comparison.
Selection Checklist
- Complete model and article number
- Voltage and frequency
- Required airflow and static pressure
- Fan diameter and mounting dimensions
- Airflow and rotation direction
- Operating temperature and installation environment
FAQ
Q1. What is the full model number?
A1. The model is FN050-4EK.4I.V7P1, with article number 140057 as listed by APAC FAN.
Q2. What fan size is listed?
A2. APAC FAN currently lists a 500 mm fan size.
Q3. What airflow is listed?
A3. APAC FAN currently lists maximum airflow of 9,800 m³/h. Use the applicable performance curve for final selection.
Q4. Can another FN050 fan be used as a replacement?
A4. Only after comparing the full suffix, article number, electrical data, dimensions and fan performance.
Q5. What information should I send for selection support?
A5. Send the fan label photo, complete model/article number, voltage, equipment type, required airflow/pressure and installation dimensions.
Need help confirming the correct fan for a replacement or new project? Send APAC FAN the existing model number, required airflow, static pressure, voltage, installation dimensions and control requirements. Our team can help you identify a suitable product and check availability.
